Pregnancy and neonatal outcomes in 25 pregnant women diagnosed with new-onset acute myeloid leukemia during pregnancy.

PURPOSE: The aim was to analyze the pregnancy and neonatal outcomes of pregnant women with new- onset acute myeloid leukemia (AML) diagnosed during pregnancy. METHODS: In this retrospective study 25 pregnant women who were diagnosed with new-onset AML during pregnancy from January 2010 to January 2021 were enrolled. RESULTS: A total of 4, 13 and 8 pregnant women with new-onset AML were diagnosed during the first, second, and third trimesters, respectively. Twelve of the 25 pregnant women underwent therapeutic abortion and 13 gave birth (9 preterm and 4 full-term newborns). The gestational age at initial clinical manifestations (13.4 ± 3.7 vs. 27.7 ± 5.6 weeks, P < 0.01) and diagnosis (16.9 ± 4.4 vs. 29.7 ± 5.5 weeks, P < 0.01) was lower in the pregnant women who underwent therapeutic abortion than in those who gave birth. Eighty-four percent (21/25) of the pregnant women with new-onset AML during pregnancy survived and were in remission and all the newborns were born alive. Three of the 13 newborns were exposed to chemotherapy, but no congenital malformations were observed. Eight newborns were admitted to the neonatal intensive care unit (NICU), and all recovered. The complete blood counts and biochemical examinations of the 8 newborns were normal. CONCLUSIONS: New-onset AML during an earlier stage of pregnancy may increase the risk of poor pregnancy outcomes. The neonatal outcomes of pregnant women with new-onset AML during pregnancy are good with proper treatment.

Treatment of Advanced Gingival Recession Secondary to Surgical Failure with Large Size Deepithelized Gingival Graft Associated with a Modified Tunnel Flap.

Objective: To describe the use of a large size deepithelized gingival graft (DGG) associated with full-split tunnel technique in a clinical case of advanced gingival recession secondary to surgical failure (GRSF). Clinical Considerations. The presented case report helped to achieve satisfactory root coverage, ideal keratinized tissue gain, improvement in soft tissue quality and esthetics, scar deformity correction, and vestibular depth deepening with a one-step procedure of large size DGG associated with full-split tunnel technique for a condition of deep gingival recessions of 7-11 mm caused by a failed bone implantation surgery. Conclusions: The large size DGG associated with full-split tunnel technique provided a versatile one-step procedure to obtain ideal results for advanced GRSF. Clinical Significance. GRSF that is generally associated with inadequate keratinized tissue and scar formation could be rather difficult to deal with. The large size DGG associated with full-split tunnel technique, as a one-step procedure, provided a predictable and practical treatment modality.

Remodeling of H3K9me3 during the pluripotent to totipotent-like state transition.

Multiple chromatin modifiers associated with H3K9me3 play important roles in the transition from embryonic stem cells to 2-cell (2C)-like cells. However, it remains elusive how H3K9me3 is remodeled and its association with totipotency. Here, we integrated transcriptome and H3K9me3 profiles to conduct a detailed comparison of 2C embryos and 2C-like cells. Globally, H3K9me3 is highly preserved and H3K9me3 dynamics within the gene locus is not associated with gene expression change during 2C-like transition. Promoter-deposited H3K9me3 plays non-repressive roles in the activation of genes during 2C-like transition. In contrast, transposable elements, residing in the nearby regions of up-regulated genes, undergo extensive elimination of H3K9me3 and are tended to be induced in 2C-like transitions. Furthermore, a large fraction of trophoblast stem cell-specific enhancers undergo loss of H3K9me3 exclusively in MERVL+/Zscan4+ cells. Our study therefore reveals the unique H3K9me3 profiles of 2C-like cells, facilitating the further exploration of totipotency.

Lack of geographical and ethnic distribution of Hepatitis B virus genotypes in Hainan Island, China.

Recent studies showed that the distribution of hepatitis B virus (HBV) genotype exhibited geographical and ethnic characteristics. Haikou city is the largest city on Hainan Island that geographically isolated from mainland of China, and is the home of multiple ethnic groups. The aim of the study was to investigate the characteristics of the HBV genotype/subgenotype distribution in Haikou city. HBV DNA was isolated from180 serum samples derived from the Han and Li groups. The HBV genotype was detected by polymerase chain reaction using genotype-specific primers and was further determined by full-length genome sequences. The results revealed that the genotype B (37.2%) and C (62.8%) were the predominant HBV genotypes in Haikou, regardless of ethnic background., Additionally, the genotype distribution was not significantly different regarding ethnicity, sex or level of serum HBV DNA. Moreover, there were multiple subgenotypes circulating in the region. In conclusion, our study revealed the diverse HBV genotypes/subgenotypes in Haikou. These findings provide a preliminary study of the distribution of HBV genotypes circulating on Hainan Island.

Cyclocytidine hydrochloride inhibits the synthesis of relaxed circular DNA of hepatitis B virus.

Background: Cyclocytidine hydrochloride (HCl) has been reported to inhibit DNA synthesis by affecting DNA polymerase. Here, we tested the antiviral effect of cyclocytidine on hepatitis B virus (HBV) DNA synthesis, which is reliant on DNA polymerase activity. Materials and Methods: Cyclocytidine HCl was treated to HBV-producing HepAD38 cells or added to an endogenous polymerase reaction, and HBV DNA was detected by Southern blot. Results: Treatment of 20 µM cyclocytidine HCl significantly decreased the production of relaxed circular (rc) DNA in HepAD38 cells and block rcDNA synthesis in endogenous polymerase reaction (EPR), a cell free assay, possibly by inhibiting the HBV DNA polymerase activity. Conclusion: Cyclocytidine HCl could inhibit the synthesis of HBV rcDNA, the precursor of covalently closed circular DNA, and this result provides a case for the usage of "old" drugs for "new" applications.

Lithium superionic conductors with corner-sharing frameworks.

Superionic lithium conductivity has only been discovered in a few classes of materials, mostly found in thiophosphates and rarely in oxides. Herein, we reveal that corner-sharing connectivity of the oxide crystal structure framework promotes superionic conductivity, which we rationalize from the distorted lithium environment and reduced interaction between lithium and non-lithium cations. By performing a high-throughput search for materials with this feature, we discover ten new oxide frameworks predicted to exhibit superionic conductivity-from which we experimentally demonstrate LiGa(SeO3)2 with a bulk ionic conductivity of 0.11 mS cm-1 and an activation energy of 0.17 eV. Our findings provide insight into the factors that govern fast lithium mobility in oxide materials and will accelerate the development of new oxide electrolytes for all-solid-state batteries.

Discrepant results of hepatitis B virus genotype determination by PCR and DNA sequencing.

Currently, multiplex-PCR with genotype-specific primers is widely used for preliminary screening of hepatitis B virus (HBV) genotypes, despite its relatively lower accuracy compared with whole genome sequencing. Here, we present the discrepant results of HBV genotyping by PCR and full-length sequencing. HBV DNA was isolated from chronic hepatitis B serum and the HBV genotype was detected by PCR using genotype-specific primers and full-length genome sequencing. As a result, the determination of genotype B by the PCR method was consistent with the DNA sequencing results; however, PCR revealed that genotype C showed a mix of B and C genotypes in the current study. In conclusion, the PCR-based genotyping may not provide accurate information of the HBV genotype and whole genome sequencing remains the "gold standard" for HBV genotyping.

Nerve growth factor enhances the therapeutic effect of mesenchymal stem cells on diabetic periodontitis.

Patients with diabetes frequently suffer from periodontitis, which progresses rapidly and is difficult to cure. Mesenchymal stem cell (MSC) transplantation may effectively treat periodontitis, but high glucose limits its therapeutic effect in diabetes. Nerve growth factor (NGF) has the functions of cell protection, anti-apoptosis and immune regulation, and may have potential application in diabetic periodontitis. In the present study, flow cytometry indicated that NGF inhibited MSC apoptosis induced by high glucose. Of note, high glucose promoted the transformation of MSCs into the proinflammatory type. NGF inhibited this transformation of MSCs under diabetic conditions and further decreased the proportion of T cells and monocytes/macrophages among lymphocytes. An animal model of diabetic periodontitis was constructed and MSC transplantation was demonstrated to reduce alveolar bone loss caused by diabetes. NGF enhanced the therapeutic effect of MSCs and maintained transplanted MSC survival in periodontal tissue of diabetic mice. Immunohistochemical analysis of periodontal tissues suggested that in the NGF group, infiltration of T cells and macrophages was reduced. Neurotrophic receptor tyrosine kinase 1 was indicated to have a key role in these effects of NGF. In conclusion, NGF may enhance the therapeutic effect of MSCs on diabetic periodontitis by protecting the cells and promoting the transformation of MSCs into the immunosuppressive type.

A pilot study of mandibular expansion in combination with a fixed-appliance for increasing the effective space of the mandibular arch: Finite element analysis and three-dimensional cone-beam computed tomography.

ABSTRACT: Techniques for enhancing the effective space of the mandibular arch are urgently needed. Therefore, this study aimed to perform mandibular expansion in combination with a fixed-appliance technique, with preliminary monitoring by finite element analysis and 3-dimensional cone-beam computed tomography (CBCT).Finite element models were structured according to CBCT images of a 14-year-old girl. The von Mises stress of the alveolar bone and tooth displacement were assessed in different models. The technique was also applied in an 11-year-old boy. CBCT was performed at post-expansion, post-retention, post-treatment and 2 years after treatment. Tooth movement and alveolar bone stress were assessed by the CAD software.Finite element analysis suggested that the teeth tended to stand upright in the buccal side in the expander model compared with the expander-remove model. However, minimum tooth change was observed in the normal model, indicating highest stability. The von Mises stress of the alveolar bone was decreased in the normal model compared with the expander model, suggesting that buccal-inclined teeth could more easily lead to alveolar bone stress than normal ones. Based on CBCT data and the 3D mandibular dentition model fitting, mandibular teeth tended to be upright in the buccal side after retention compared with the post-expansion condition, which somewhat differed from finite element analysis results. Furthermore, dehiscence and fenestration were not observed.This expansion technique is expected to increase the effective space after mandibular expansion and reduce buccal alveolar bone stress.

Efficacy of different designs of mandibular expanders: A 3-dimensional finite element study.

INTRODUCTION: Nonsurgical mandibular expansion has been increasingly performed in recent years because it can effectively expand the mandibular dental arch. However, many types of mandibular expanders have been used in previous studies. No relevant studies have compared the biomechanical responses of different designs of mandibular expansion appliances with screws. Therefore, the purpose of this study was to analyze the stress distribution and displacement of the dentoalveolar structures according to different designs of mandibular screw expanders. METHODS: Cone-beam computed tomography scans were used for 3-dimensional reconstruction of the mandibular finite element model. Four different designs of mandibular expanders, 1 removable expander (type A) and 3 fixed expanders (types B, C, and D), were added to the finite element models. Expanders were activated transversely for 0.2 mm. The initial tooth displacement and von Mises stress distribution were evaluated. RESULTS: All the expanders enlarged the arch dimensions. In types A and B, the stress was mainly concentrated in the region of the anterior teeth, along with greater tooth displacement, whereas in types C and D, greater stress and displacement occurred in the region of the posterior teeth. Type A showed the greatest amount of transverse displacement. Type D was more efficient in the region of the posterior teeth. CONCLUSIONS: Types A and B should be used with great caution in the clinic because of their incompatible expansion pattern. Type D is the recommended mandibular expansion appliance because of its appropriate expansion pattern.

Preventing Thin Film Dewetting via Graphene Capping.

A monolayer 2D capping layer with high Young's modulus is shown to be able to effectively suppress the dewetting of underlying thin films of small organic semiconductor molecule, polymer, and polycrystalline metal, respectively. To verify the universality of this capping layer approach, the dewetting experiments are performed for single-layer graphene transferred onto polystyrene (PS), semiconducting thienoazacoronene (EH-TAC), gold, and also MoS2 on PS. Thermodynamic modeling indicates that the exceptionally high Young's modulus and surface conformity of 2D capping layers such as graphene and MoS2 substantially suppress surface fluctuations and thus dewetting. As long as the uncovered area is smaller than the fluctuation wavelength of the thin film in a dewetting process via spinodal decomposition, the dewetting should be suppressed. The 2D monolayer-capping approach opens up exciting new possibilities to enhance the thermal stability and expands the processing parameters for thin film materials without significantly altering their physical properties.